The Singer® Essentials collection contains an array of presser
feet and attachments that will allow you to perform a variety of
tasks. They are designed to help you achieve professional
results on your sewing projects while saving time and effort.
The attractive package contains expert instructions on using the
foot or attachment. Always choose genuine Singer® parts.
Button Sewing Foot
Holds the button firmly in place when attaching it to a garment.
$9.95
Buttonhole Foot
Transparent foot used for executing 4-step or manual
buttonholes. It includes markings that help position the needle.
$9.95
Embroidery & Darning
Foot
Used to create free hand embroidery and quilting (stippling) as
well as monograms.
$14.95
Even Feed Foot
Used to sew plaids, velours, velvets, ultra suede and other
napped fabrics. (Also known as a "Walking" foot.)
$23.95
Feed Cover Plate
Covers the feed dogs for free hand embroidery, free hand
monogramming and sewing on buttons.
$9.95
Rolled Hem Foot
Used for rolled edges on scarves, handkerchiefs and linens made
from delicate fabrics.
$9.95
Ruffler Foot
Quickly and easily produces professional looking ruffles or
pleats. Use for home décor projects and clothing construction.
$29.95
Side Cutter
Trims away excess fabric as you sew. Zigzag or overedge stitch
required.
$39.95
Special Purpose Foot
Ideal for decorative sewing such as appliqué, satin stitching
and cut work. It has a grooved bottom that allows for thread
build-up in decorative stitches. (Also known as a "Decorative
Stitch" foot or "Satin Stitch" foot.)
$7.95
¼-Inch Foot
Popular with quilters, this foot is used for piecing quilt
blocks, sewing narrow ¼-inch seams and topstitching. Also know
as a "Quilting" foot.
$14.95
Projects
Beginners and experts alike will love our
monthly projects. They feature great gift ideas and items for
your home and family.
Confetti Placemats General Sewing
Make durable confetti placemats for Halloween from two
layers of clear vinyl, a layer of colored nylon net, and
decorative holiday confetti. Small, flat Halloween
decorations, like the jack o' lanterns, ghosts, and bats
shown here, can be mixed with the confetti. Random rows
of machine stitching divide the placemat into
compartments. For ease in stitching on vinyl, use a size
90/14 needle and a long stitch length. Loosen the needle
thread tension, and stitch at a slow speed with a sheet
of tissue paper under the placemat. Look for seasonal
plastic or metallic confetti in many shapes at craft and
fabric stores as well as card and gift shops. The
instructions that follow are for finished placemats that
measure approximately 12" x 18" (30.5 x 46 cm).
Decorative metallic or plastic confetti
or other small, flat decorations.
Pinking shears or scalloped scissors.
Spray adhesive.
Cutting
Directions
For each placemat, cut two 13-1/2" x 19-1/2"
(34.3 x 49.8 cm) rectangles from vinyl and cut
one 13" x 19" (33 x 48.5 cm) rectangle from net.
How to Sew a
Confetti Placemat
1) Mark a line on one piece of vinyl 3/4" (2
cm) from each edge, using a permanent-ink
marker.
2) Place the nylon
net over a protected surface; apply spray
adhesive lightly over net. Place confetti on
net, at least 1" (2.5 cm) from edges; arrange as
desired, pressing in place with finger.
3) Position the
marked piece of vinyl over the net and confetti;
smooth in place. Place vinyl and net over
remaining vinyl piece; be sure any large air
pockets are removed. Pin layers together outside
marked line.
4) Stitch around
placemat 1/4" (6 mm) inside marked line; place
tissue paper under placemat while stitching.
5) Stitch random
rows across the placemat, dividing it into
compartments; pivot fabric when possible for
continuous stitching. Use tape as guide for
stitching straight rows.
6) Remove tissue
paper. Trim around all sides of the placemat
inside marked lines, using pinking shears or
scalloped scissors; cut through all layers.
Tips for Sewing
Confetti Placemats
Cut plastic motifs from decorative wired
garland, to mix with confetti when larger motifs
are desired.
Use a monofilament
nylon thread for stitching that is least
visible.
Prevent presser foot from
sticking to the vinyl by applying silicone
lubricant frequently under front of presser
foot.